How to connect the fused electrical outlet

DAMAVO ® It is a professional manufacturer of fused electrical outlet,  switches. It introduces a safe and easy to install fused electrical outlet, which is very suitable for cars, RVs and ships. The fuse box is dust-proof and has fuse head.

Wiring method of fused electrical outlet:

1. First of all, take the three hole plug as an example. The top one must be the ground wire.

2. The measuring fuse and the three hole plug are the two plugs parallel to the triangle, and the one is connected. If the measuring fuse and the three hole plug are connected, the one that is connected is not connected for the time being, and the one that is not connected is connected to the zero line. If the measuring fuse and the three plugs of the switch are connected, it is easy. If the other two pile heads of the measuring switch can be disconnected, connect the live wire or the phase wire to the other pile head that can be disconnected; The second situation is that the fuse and the two parallel plugs are not connected, so skip directly to step 3.



3. Because the second situation is that the fuse and two of the three hole plug are not connected, one of the three pile heads of the fuse and the switch must be connected. Measure the pile head of the switch and the fuse that can be disconnected, and connect the pile hea that can be disconnected to the remaining pile head of the plug. The fuse fuse 4, the fuse and the three pile heads of the switch and one of the three hole socket are not connected. There are two ways to connect. One is to connect the phase line at the end of the fuse, The other end is connected to any one of the three pile heads of the switch, and the end of the switch that can be disconnected is connected to the remaining pile head of the three hole socket; Or connect the fire wire from one pile end of the switch, the one that can be disconnected is connected to the fuse, and the other end of the fuse is connected to the rest of the sockets.

PS: this fuse should be a one-time direct protection fuse. Once it is fused, it cannot be recovered. Although it seems to be directly connected on the surface, it should be fused when there is a large current or when the protection current is reached



Attention shall be paid to the wiring of fused electrical outlet: disconnect the power supply before wiring to prevent electric shock; The cleaning of the bottom box of the switch socket is carried out after the installation of the switch socket by carpenters, painters, etc., and it is inevitable that a large amount of dust will accumulate in the bottom box that has been placed for a long time. During installation, the bottom box of the switch socket shall be cleaned first, especially the dust and impurities in the box shall be cleaned, and the residual dust in the box shall be wiped off with a wet cloth. This can prevent special impurities from affecting the use of the circuit.

Looking forward to cooperating with you! To see FAQ know more. or  Contact sales to start your inquiry! (0086) 752-5779666  or send E-mail to us!