How to install and use the car charger? What needs attention?

  • How to install the car charger:
1. Insert the USB power adapter into the cigarette lighter in the car (usually one in the cab and one in the trunk), insert it into the plug (as soon as it is plugged in until you hear a clicking sound), and the indicator light is on to charge. (Note that it can only be charged when the car engine is started)
2. Using the USB cable and adapter, connect the mobile phone, MP3 or standard USB interface product to the car USB power adapter to charge it.
3. Please check the power consumption specifications of digital products before use to avoid overloading.
usb charger,usb car charger,fast charging,type-C charger socket
  • How to use the car charger:
1. On the car cigarette lighter, insert the USB car charger, and output DC voltage through the standard USB interface.
2. The electronic design parameters such as voltage and current fully comply with the pda mobile phone standard and will not cause damage to your beloved machine.
3. Connect the USB data cable to power and charge various electronic products such as MP3/MP4, mobile phones, small speakers, Bluetooth, PSP and so on.
usb charger,usb car charger,fast charging,type-C charger socket
  • Precautions when using a car charger

  1. The car charger is very small and practical, its installation and use is very simple, as long as the cigarette lighter socket in the car can be. The car cigarette lighter socket is as shown below: when charging mobile phones, navigators and other devices, just unplug the cigarette lighter with the cigarette mark, connect the device to be charged to the car charger with the charging cable, and then plug it into the car's cigarette lighter Just the socket.
  2. We can see that there are two springs in the cigarette lighter, they are both used to fix the cigarette butts, so when installing the car charger, it cannot be inserted against the spring, otherwise it will easily lead to cigarette lighting The device and car charger are damaged. Therefore, the correct way to install is to insert it along the track on the side of the spring, and after the car charger is installed, in order to ensure that it is firmly fixed with the spring, you can move the charger back and forth.
  3. ​​​​​​​When igniting, the car charger must not be connected to the charging device, because the current at the moment when the engine is started is very large. If an electronic device such as a mobile phone is connected at this time, it will easily burn out the mobile phone.​​​​​​​
  4. ​​​​​​​Nowadays, many car owners like to put a humidifier in the car to increase the humidity of the air in the car and avoid excessive drying. But we know that electricity and water are mutually exclusive, so we don't use the car charger in an excessively humid environment, so car owners must pay attention to the humidity in the car at all times. It should also be noted that the car charger should not be stored in an environment that is too humid to avoid damage. When we use the car charger, try to keep the room temperature around 0-45 degrees.